'14-'21 KTM RC390 & KTM 390 Duke
Parts and Accessories & HardRacing's RC390 Project Bike:
Check out our Youtube
Channel for Lots of Great
KTM 390
Parts Installation Videos >>
<<
Already know what you want ? Click here to go Straight to >>
SHOPPING CART
<< For Special Offers, follow us on Twitter
& Facebook: Click
>>
<< to become a Fan or Friend.
You could be one of our Lucky $30 HardRacing e-GIFT CARDS PRIZE WINNERS,
Each Week..
New Parts / Updated: 11-01-24
We update these pages often.
Be sure to hit
REFRESH on your browser, each time you check this page.
Or it may Not Show the new parts.
The All New PC 6 & Dyno Jet Quick
Shifters:
Featuring: State of the Art Technology
New Mapping methods,
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order
OPTIONAL ACCESSORIES
AUTO TUNE DEVICES - for Self Mapping.
WIDEBAND Commander 2 (WBC2) for use with PC V
Similar to the
“Auto Tune” kit that include Wide Band O2 sensors and
control boxes. It will plug directly into the PCV and allow automatic fuel
adjustments. Auto Tune can make a map for each gear it can map each
cylinder separately for each gear if needed. (basic settings would make one
map for all gears) “Warm Up” fuel adjustment (unit reads engine temp
and allows fuel/timing adjustments based on it) Each map cell is
individually adjustable so you can specify an exact AFR value for each area
if needed. This allows the tuner/user to select specific AFR targets for
idle, cruise, and large throttle opening areas. By doing this you can
automatically tune the cruise area for best fuel economy while at the same
time achieve maximum power at wide open throttle.
If Dyno Jet does not have the exact map for your combination of parts you
simply need to choose the closest one and let the WBC2 kit do the rest.
Additional features of WBC2 over an Autotune :
Low Voltage output for o2 Sensor Signal (to wire directly into your
stock ECU)
- Output for Optional A/F Digital Gauge
WIDE BAND COMMADNER 2 AUTO TUNE KITS
Retail : $400
OUR SALE PRICE - $335.99
P.N. 15-7023x
(IN
STOCK)
The Dynojet Quick Shifter Sensors allow "full throttle, clutch-
less" upshifts. These high quality sensors provide fast, accurate and
reliable shifting in conjunction with the Power Commander. Sensors are
attached to the gear linkage and connect into the Power Commander expansion
port. All sensors include a Software utility which allows the user to adjust
the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander
Control Center Software. "Please note these are
NOT Power Shifters. They do
NOT shift for you. They
allow "full throttle, clutch- less" upshifts, by cutting the Fuel
or Spark for a split second as you start to shift
with your foot..
Dyno Jet PC V Quick Shifter
On Sale $270.99
More Information ->>
DynoJet
Quick Shifters <<
aRacer AF2 Professional Wideband O2 AFR Module
"ALL NEW" aRacer AF2
(replaces the old discontinued AF1)
Sale Price start at $320
>>
Watch Video
for More Details <<
IN STOCK
This was amazing. We Shortened our stopping distance by
10 FEET at 50 mph.
The Faster the speed, the more difference between stock and the upgrade.
Most likely stops from 60 mph or above would yield even More contrast
from STOCK vs. Galfer Upgrades.
Radial Brake Master Cylinder 15 RCS
The RCS 15mm has been designed for the rider who requires more brake
performance and variation in brake lever feel when
compared to a stock
master cylinder.
The RCS offers flexibility to change the brake lever ratio at the turn of a
screw.
This would enable the rider to decide on the 15 x 20 option normally
used on the street or the 15 x 18 option
which is suited to track day or
amateur racing.
This option is achieved by the use of an eccentric drive
which is turned by the simple screw mechanism and has a color coded pivot
rod end
that allows the rider at a glance to understand the current setting.
The 15mm RCS is designed for use on single rotor systems (Supermoto) or dual
floating 4 piston calipers.
RCS15
Sale Price:
$290 (Order this Brembo RCS on-line, and receive
FREE EXPRESS Shipping )
IN STOCK
BREMBO "CORSA CORTA
RR" RCS15
Brake Mastercylinder
Sale Price:
$695 (Order this Brembo RCS on-line,
and receive FREE EXPRESS Shipping
)
>>
Motion Pro Revolver
3 Throttle Kit << The best way to improve throttle control, but throttle sensitivity
can be changed mechanically to suit riding conditions and rider preferences
to great advantage no matter what your level of skill. SALE PRICE - $148.49 (requires
plug-n-play start/stop switch)
Race Tech manufactures precision high performance springs that have
a high stiffness to mass ration.
In other words; Race Tech Fork springs are lightweight for the their
partifuclar rate.
This requires the finest materials and processing.
Race Tech OEM Replacement Fork Springs -
$119
aRacer AF2 Professional Wideband O2 AFR Module
"ALL NEW" aRacer AF2
(replaces the old discontinued AF1)
Sale Price start at $320
>>
Watch Video
for More Details <<
IN STOCK
The SENA 50R, 50S, 30K,20S, 10S, 10C Headsets are a State-of-the-art Motorcycle & Powersports Bluetooth®
communication system.
The unit provides a sleek and aerodynamic design that offers a versatile jog
dial that maximizes
the ease of use for riders.
Great Range, excellent sound quality.
- Long Lasting Battery life
- Listen to your music
- Answer or make Phone calls
- Water Resistant
- Easy to setup and use right out of the box >>
SENA
Communication System <<
The All New PC 6 & Dyno Jet Quick
Shifters:
Featuring: State of the Art Technology
New Mapping methods,
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order
OPTIONAL ACCESSORIES
AUTO TUNE DEVICES - for Self Mapping.
Real time fuel adjustments
Display channels real-time: RPM, TP,
map position (when using map
switch), duty cycle,
fuel change,
ignition change & wideband air/fuel
ratio- (w/WB2 or AutoTune connected)
Weather resistant for use in all
conditions
Log channels saved to internal
memory and can be viewed / analyzed
with Dynojet’s PowerCore Software
High contrast display, viewable in
direct sunlight
Dyno Jet POD-300 Display (for
use with PCV only)
Retail - $350 OUR Sale Price -
$298.99
IN STOCK
Click to Enlarge >>
LED Headlight UPGRADE Kit Includes: (1) Custom Plug-n-Play wire
harness so you have BOTH Lights On High Beam
(2) LED Bulbs 6000k Pure White (3600
lumens each)
(1) Cover Plate & Mounting Hardware Discontinued
>>
Watch Video Installation <<
Don't take chances with a Flat, or leaking Tire which can
cause a crash or accident on your bike.
This system is very Easy to install. Takes only about 3-5 min.
installation
Completely Wireless.
>> Tire
Pressure Monitoring System (TMPS) <<
Direct Fit Sport Bike & Motorcycle H4,
H7, H11, 9005, 9006
LED Headlight Bulb
Retail Price - $52 Sale
Price-$38.99-46.99
Click to Enlarge >>
LED Headlight UPGRADE Kit Includes: (1) Custom Plug-n-Play wire
harness so you have BOTH Lights On High Beam
(2) LED Bulbs 6000k Pure White (3600
lumens each)
(1) Cover Plate & Mounting Hardware Discontinued
>>
Watch Video Installation <<
>>
Motion Pro Revolver
3 Throttle Kit << The best way to improve throttle control, but throttle sensitivity
can be changed mechanically to suit riding conditions and rider preferences
to great advantage no matter what your level of skill.
SALE PRICE - $148.49 (requires
start/stop switch)
QUICK SHIFTERS
Click
>>
The Dynojet Quick Shifter Sensors allow
"full throttle, clutch- less" upshifts. These high quality sensors
provide fast, accurate and reliable shifting in conjunction with the Power
Commander. Sensors are attached to the gear linkage and connect into the
Power Commander expansion port. All sensors include a Software utility which
allows the user to adjust the "Kill Time" and "Minimum RPM Shift Point"
within the Power Commander Control Center Software. "Please note these
are
NOT Power Shifters. They do
NOT shift for you. They
allow "full throttle, clutch- less" upshifts, by cutting the Fuel
or Spark for a split second as you start to shift
with your foot..
Dyno Jet PC V Quick
Shifter:
ON SALE -270.99 (IN
STOCK)
Real time fuel adjustments
Display channels real-time: RPM, TP,
map position (when using map
switch), duty cycle,
fuel change,
ignition change & wideband air/fuel
ratio- (w/WB2 or AutoTune connected)
Weather resistant for use in all
conditions
Log channels saved to internal
memory and can be viewed / analyzed
with Dynojet’s PowerCore Software
High contrast display, viewable in
direct sunlight
Dyno Jet POD-300 Display (for
use with PCV only)
Retail - $350 OUR Sale Price - $298.99
IN STOCK
Starlane Digital Gear Indicator
w/ Integrated Shift Light
GPS (Satellite) Technology.
NO Transponder Need. Imagine, No More worrying about setup .Transponders on the
side of the track each time you go out, or
Each time you come in. Those days are done.
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you. Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and
much more.
You can even Save each track, in memory. NO Wire Splicing, or
taping necessary.
This Unit
Easily transfers from bike to bike. Or you can put it in your car, or
truck, or SUV.
Very handy device.
TYPE R - With TRACK MAPPING. Downloaded to your
PC or Laptop
Escort / Passport iQ Radar Detector / Laser Detector /
GPS Navigation,
All in one Device
click >>
Passport iQ <<
STM Slipper Clutches
Slipper Clutches are now becoming
Standard equipment on more and more
NEW Sport Bikes such as (05 GSX-R1000 / 04-05 ZX-10R /
03-05 ZX636/6RR/ 06 R6).
Now, STM Has released a Model for nearly ALL Popular Models
STM Slipper Clutches are an excellent Upgrade to High
Performance Sport Bikes.
BREMBO RSC Replacement Cable Clutch Lever Mechanical clutch lever assembly machined entirely from billet.
Lever boss has special geometry.
Plug-and-play design ensures the lever can
mount directly to the original arm lever assembly.
Similar in all respects to
the 19RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the
famous tri-color flag on the lever boss.
Perfect Match for your RCS Brake Master Cylinder
The newest offering from the Brembo HP line. The M4 CAST Monobloc Caliper.
Designed with an entry level cost in mind... Using
CAST Alum.
Instead of Billet.
These calipers are of monoblock construction utilizing a unique gravity cast
procedure.
High temperature main seals plus dust seals allow for use on street or on
the track.
Caliper CAST ALUM. bodies are then CNC machined.
Brake pads made from sintered material so & are ideal for use in wet and dry
conditions.
Kit includes instruction manual with all information about fitting,
bleeding, maintenance and more.
108mm
M4 Cast Alum. Calipers To See More Information on BREMBO CALIPERS, ROTORS and MASTERCYLINDERS
>> BREMBO<<
Brembo HP
floating rotors were developed specifically to provide owners of
Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI)
with the
maximum performance levels on the street and on the track. The
new rotors are available in three diameters and are of greater
thickness than standard rotors.
The braking surface features a
series of drilled holes to maximize performance and control when
braking while simultaneously reducing rotating mass
with
consequent advantages in terms of machine handling. The braking
surface is connected to the carrier, which is machined from
solid aluminum
and is the product of a comprehensive FEM
calculation procedure. The connection is achieved by means of
ten floating- type aluminum buttons,
reflecting a strictly race
style engineering project. The kit contains the two rotors, and
a set of Brembo decals.
>>
Shogun Crash Kits
<<
Kits Include: (Frame Sliders, Bar ends
Sliders, & Swing Arm Spool/Sliders)
RACE TECH SHOCK SPRINGS - for OEM Shock
Race Tech HP Springs have a high stiffness-to-mass ratio.
In other words; our springs are light weight for
their particular spring rate.
This requires the finest materials and processing. Shot-peened and
pre-set so they cannot sack out.
All Race Tech HP Springs have the highest rate tolerences in the
industry.
These are the finest springs in the world-guaranteed.
Race Techs original bolt-on fork valving system
for cartridge forks
Triples the flow area by putting valving control on the shim stack
instead of the overly restricted stock piston
Outstanding tunability, improved control, traction, plushness and
bottoming resistance
Includes complete instructions, Gold Valve pistons, valving charts, and
valving shims
BREMBO REAR
HP CALIPER
Following the latest development in
Brembo’s high performance kits programme, which broadly extends the
product range still further,
motorbike enthusiasts are now offered a
rear caliper and bracket kit interchangeable with the
majority of OE assemblies fitted to Japanese and European supersport
models.
Machined entirely from billet, the caliper body is the outcome
of exhaustive FEM calculations that optimize weight and stiffness.
The caliper is supplied complete with sintered pads —
currently the top option available on the market.
Special care has been
taken over the need to achieve optimum control of the braking
action,
even in conditions of poor grip that could be caused by
reduction of rear wheel weight during the braking action.
The kit is
compatible both with OE brake master cylinders and with OE discs fitted
to all main supersport bikes.
In the case of Japanese supersport bikes
(SUZUKI, YAMAHA, HONDA and KAWASAKI),
the kit includes
an adapter bracket that drops the caliper below the rear axle — its
usual position on racing machines.
This helps to lower the centre of
gravity of bike and rider.
Hotbodies Color Matched Rear Huggers >>
HOTBODIES
<<
VORTEX Upper Fairing Stay (Race use ONLY) $149.95
Each Year, when the “ALL NEW”
models are released it takes anywhere from
2 weeks up
to 4 months for new parts to get released to the public.
The Parts Manufacturer’s
have to get the bikes, make the prototypes. Test the protype.
If it works correctly, then they Manufacturer volumes, and then get them to the
dealers.
This takes time. It’s just part of life.
Meanwhile, customers like yourself, are anxiously waiting to get the newest
and coolest products… NOW.
And each year, many of you will wait until the product
is released to order it.
But, by the time the product is released, the demand far exceeds the supply.
Meaning 100
customers want Product X, but only 30
units arrive in the first shipment to the U.S. So, that means 70 customers have to wait another 2-4 weeks
for more product to become available.
Because Soo many others have already placed their orders, you have to wait
even longer to get yours.
Well, there is a way to fix that.
This
year we are encouraging our customers to order early.
There is absolutely, NO RISK. NON AT ALL.
We will NOT Charge your credit card until the product is ready to ship
to you. PERIOD.
NO Deposit, NO Cancellation Fee’s, NO BS.
And you may cancel your
order at anytime. We have no problem with that.
The demand for these new parts is soo high, if you cancel, we just go down the
list,
and make the next customer the happiest man in town.
So, you have Nothing to
lose… and soo much to gain.
The sooner you put your
order in for a new part, the higher up on the list you get.
That way, when the new part gets released, you get first dibbs over everyone
else.
It doesn’t matter if there is a price yet or a even a
part number.
Just tell us what bike, and what part, and Your Order is LOCKED.
PERIOD. It's that easy.
We will call you the day the part is ready to ship, and give you final decision
if you still want it.
If you say “YES”…. we will ship it immediately.
If you say “NO”, we will cancel the order and move down the list to the next
customer.
NOTHING TO LOSE……… Yet Soo much to gain.
Don’t wait till the last
minute. If you have a part you want to order, CALL US
now or >Order On-Line<
ONE MORE TIME….. DON’T WAIT.
You know the saying, “You snooze, You lose”.
** Please note,
the No cancellation fee ONLY applies to "ALL NEW" Parts that have not been
released yet.
It does NOT apply to
"Special Order Parts" that have already been released to the public and are no
longer in demand.